ProThermTM 50 System Specificationslaboratory scale thin film processor
|
|---|
System Specifications ProThermTM 50 Unit
- Surface Area: 0.50 ft²
- Maximum jacket side temperature: 366° F
- Maximum jacket side pressure: 150 psig
- Minimum jacket side liquid flow rate: 15 gpm,
(Not applicable if steam is used)
 ProThermTM 50 Cart
- Length: 64 in.
- Width: 28 in.
- Height: 71 in. (to top of condenser)
- Condenser: 3.5 sq. ft., type BEU
- Feed pump: FMI, 1/3 hp, 8.6 gph, stainless steel piston pump
- Feed tank: 18 liters, 316 SS
- Seal pump: Isochem, 1/2 hp, 0.2 gpm, magnetic drive gear pump
- Condensate receivers: 5000 ml
- Bottoms receiver: 2000 ml
- Electrical requirement: 230 vac, 20 amp max, single phase
- Condenser water requirement: 11 gpm @ 15 psig, 1.5 tons
- Seal cooling water requirement: 0.2 gpm, 70° F, 70 psig max
 Utility Cart
- Length: 48 in.
- Width: 28 in.
- Height: 36 in.
- Vacuum System: 0.48 torr ultimate vacuum; 1.5 torr @ 12 cfm
- Hot Water System: 17 gpm @ 50 psig, 8 kw
- Chilled Water System: 11 gpm @ 15 psig, 1.5 tons
- Electrical requirement: 230 vac, 60 amp, single phase
Contact Information
For more information please phone Perry Alasti at 781.893.6800 x239 or fax him at 781.647.0143 or send email to palasti@artisanind.com.
| ©2008 Artisan Industries Inc. All rights reserved. |    |
|
|
